Dakar Flash English

MeshCore Signal Tester

Real-time mesh signal monitor for MeshCore companion radios & repeaters

Aleš Janda

APK संस्करण

APK फ़ाइलें मूल रिपॉज़िटरी से मिलती हैं।

1.3.31.4 MiB न्यूनतम SDK 26
APK डाउनलोड करें
रिलीज़ की तारीख · 2026-11-13लक्ष्य SDK · 36
संस्करण में बदलाव

Version 1.3.3 - Radio tools: TX power, trace (SNR both ways), RX gain, device restart. - CLI console for repeaters (USB) and companions (firmware 1.18+). - Fixed: empty CSV export / lost import on Xiaomi and others. - Fixed: sounds going silent; a filter hiding its own input. - Fixed: resumed sessions deleted by Auto-remove; data lost when storage is full. - More reliable (re)connecting; dead WiFi links noticed quickly. - Charts: local-time labels, cleaner axes; many smaller fixes.

SHA-256 चेकसम3393cb3e422d30ca2ed818dfe47e601e0c919fd012c0c06633102624b2e158bf
1.3.21.3 MiB न्यूनतम SDK 26
APK डाउनलोड करें
रिलीज़ की तारीख · 2026-09-27लक्ष्य SDK · 36
संस्करण में बदलाव

Version 1.3.2 - Header no longer hidden under the status bar; signal colors follow a theme switch; native dialogs. - More reliable auto-reconnect (no hung attempts; waits for the pairing PIN). - A declined notification/location permission no longer blocks Bluetooth. - Safer CSV import; capture is saved when the app goes to the background. - Old/imported sessions show correctly with a short Display window. - Better GPS positions at high speed, and many smaller fixes.

SHA-256 चेकसम75a3d3156281fd45f0a0f3a839cc489628a0dffdc47e7aa2994a241614ac785e

स्क्रीनशॉट

इस ऐप के बारे में

मूल विवरण अंग्रेज़ी में है

MeshCore Signal Tester monitors mesh traffic from a MeshCore companion radio (over Bluetooth, USB-C, or Wi-Fi) or a MeshCore repeater (USB serial CLI) in real time. The connected device type is auto-detected. It is built for field signal testing: it keeps capturing received packets and your GPS position while the phone is in your pocket with the screen off. A foreground service holds the connection and location alive — something a normal mobile browser cannot do, because it freezes the page and drops the link when the screen turns off. Features: * Connect to a MeshCore companion over Bluetooth, USB-C serial, or Wi-Fi (a raw TCP link to the Wi-Fi firmware), or to a repeater over USB. * Group every reception by message, so you can see which repeaters forwarded the same packet and compare their signal side by side. * Seen-repeaters table with per-repeater RX count and max/last RSSI and SNR. * Scrolling SNR and RSSI history charts with a noise-floor estimate; zoom and pan the time axis. * Signal 3D map: each received packet is placed at your GPS location, with height encoding SNR; many map styles, or none. * Discover nearby nodes and read the SNR they measured for your uplink. * Received-packets table with full decoded detail and raw hex. * CSV export and re-import for offline review. * Persistent on-disk capture that survives a reload or restart. * Optional beep on each packet, auto-remove of old data, adjustable display window, repeater filter, keep-screen-on, device battery readout, and a light/dark theme. All captured data stays on your device. The app has no ads and uses no analytics and no tracking. Map tiles are fetched from third-party tile servers only while online. Free and open source (MIT). Source code: https://github.com/kybl/meshcore-signal-tester